10 Bathroom Materials That Will Withstand Any Abuse

Article by Amy Howell Hirt

Absolutely stunning! No. 4 is a water-resisting showstopper.


We don’t ask much from bathroom surfaces.

Just that they be beautiful and withstand every cleaning chemical invented, steamy showers, piles of damp towels, and, did we mention tantrum-induced line-drives with bath toys?

Oh, and they should be easy to clean. That’s all.

So, what materials can live up to the ask?

We asked the experts. Here are 10 they recommend.

#1 Engineered Stone Countertop
​
Dying for a white marble countertop? Join the club. But get ready to seal, reseal, and reseal. Then repeat. Year after year.

Or, go for engineered stone, which can mimic marble (and other stone materials) for about the same cost, but minus the hassle. It’s nonporous, so it resists bacteria, mold, stains, and water damage better than the real thing. Better! And it never needs sealing.

#2 Glazed Porcelain Tile Floor

Moisture is Enemy No. 1 for bathroom floors, and glazed porcelain tile is its most worthy adversary.

Glazed porcelain tiles won’t hold onto water like laminate and porous materials, and the ones that are glazed with glass are nearly stain-proof. The same is true of today’s high-quality epoxy and urethane grouts, which don’t require sealing.

#3 Vinyl Floor

Time to rethink vinyl. Hear us out. Luxury vinyl tiles, which mimic stone and wood, are awesome at resisting moisture.

Other affordable options like laminate just can’t keep up. Plus, vinyl sheets are so large, you can cover a small bath without a single seam or grout line, making it easy on the eye and easier to keep clean.

#4 Plywood Cabinets

Yup. We said plywood. But today’s “grade A” offering isn’t your mother’s plywood. (Or your Swedish cousin’s, which is actually particleboard.)

Composed of pressed layers of alder, birch, or cedar, grade A plywood (also known as furniture-grade) remains more stable in the face of moisture than solid wood, which will shrink and swell when exposed to bathroom humidity (causing cracks in painted surfaces and even warped panels).

As for the finish, you don’t need to spring for anything fancy: The factory finish applied to cabinetry nowadays will hold up to the moisture. Isn’t living in the future great?

#5 Tempered Glass Shower Doors

While you need your glass to be tempered for safety, you don’t need a special spot-resistant treatment or upgraded texture to have crystal-clear shower doors.

“Glass is easy to clean,” says Ebony Stephenson, a certified kitchen and bath designer. “I tell my clients, ‘I’ll give you a squeegee and you can save $2,000.’ It’s a lot of money when you can just wipe off your glass.” So definitely get tempered glass, but skip the add-on treatments that promise no spots.

#6 Glossy or Semi-Glossy Paint

Mold and mildew are real concerns, even on the walls, thanks to bathroom humidity. So paint sheen matters.

A full-on glossy paint has a shiny, sealed surface that blocks out moisture and wipes clear of residue, say, from hairspray, without leaving a mark like a matte finish will. But the sheen can be a bit overbearing on anything more than trim and calls attention to wall flaws.

A semi-glossy finish will hold up to cleaning and moisture nearly as well, without calling quite as much attention to bumps, dents, and other imperfections.

#7 Cast Iron Tub

A tub forged from molded liquid iron is likely going to be the toughest thing in your house — maybe even your neighborhood, depending on where you live.

You may need extra support for your floor (and your pocketbook) to bring it home, but cast iron won’t chip, scratch, or dent like fiberglass, acrylic, or even porcelain can.


This tub is your forever tub. And probably your children’s forever tub. And their kids’.

#8 Porcelain-on-Steel Tub

Don’t let its acronym, POS, misguide you: Heat-fused enamel on steel will resist corrosion, abrasion, and chipping better than synthetic materials, and it’s much more affordable than cast iron.

#9 Acrylic Panel Shower Walls

Despite their light weight, acrylic wall panels, often called shower surrounds, aren’t lightweights. They resist chipping, cracking, and peeling, and are much easier to maintain than stone tiles or slabs. Unlike tile, they nail directly to wall studs or glue to the wallboards, so they don’t require grout. Acrylic is tougher than fiberglass and colored all the way through — so it’s less likely to scratch. So even a deep cut won’t be as obvious. They’re also more affordable than tile and available in textured patterns if you want to look like you splurged on a fancy design.

#10 Stainless Steel Sink

Stainless: not just for kitchens anymore. Corrosion- and stain-resistant, stainless won’t melt under a hot curling iron like acrylic can, and it won’t dent or chip like porcelain if nail clippers plummet down from the medicine cabinet.

And it’s the perfect match for the industrial-chic look that doesn’t seem to be going anywhere.